 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 20~25W AC-DC Single Output Desktop Features : Universal AC input / Full range GS25B regulation series No load power consumption<0.5W Pass energy star(CEC) level 2 pole AC Inlet IEC320-C8 Class power (without earth pin) Full output 5~48V safety approval Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE Pass LPS for 9~48V output 2 years warranty Meet EISA 2007 (Energy Independence and Security Act) SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT RATED POWER (max.) VOLTAGE TOLERANCE Note.4 LINE REGULATION LOAD REGULATION Note.5 Note.6 TUV Rheinland Product Safety geprUfre Sicherheit GS25B05-P1J GS25B07-P1J GS25B09-P1J GS25B12-P1J GS25B15-P1J GS25B18-P1J GS25B24-P1J GS25B28-P1J GS25B48-P1J GS25B05 Note.2 5V GS25B07 7.5V 2.93A 0 ~ 2.93A 22W 80mVp-p 5.0% 1.0% 5.0% GS25B09 9V 2.77A 0 ~ 2.77A 25W 80mVp-p 5.0% 1.0% 5.0% GS25B12 12V 2.08A 0 ~ 2.08A 25W 80mVp-p 3.0% 1.0% 3.0% GS25B15 15V 1.66A 0 ~ 1.66A 25W 100mVp-p 3.0% 1.0% 3.0% GS25B18 18V 1.38A 0 ~ 1.38A 25W 150mVp-p 3.0% 1.0% 3.0% GS25B24 24V 1.04A 0 ~ 1.04A 25W 180mVp-p 2.0% 1.0% 2.0% GS25B28 28V 0.89A 0 ~ 0.89A 25W 240mVp-p 2.0% 1.0% 2.0% GS25B48 48V 0.52A 0 ~ 0.52A 25W 240mVp-p 2.0% 1.0% 2.0% 4.0A 0 ~ 4.0A 20W 5.0% 1.0% 5.0% RIPPLE & NOISE (max.) Note.3 50mVp-p SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 47 ~ 63Hz 74% 0.7A/100VAC 45A/230VAC 0.25mA / 240VAC 78% 79% 500ms, 20ms, 15ms/115VAC at full load 81% 82% 82% 83% 83% 84% 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 210g ; 60pcs / 13.5Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type, centre positive for stock ; Other type available by customer requested Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested OTHERS CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS25B-SPEC 2008-05-08 20~25W AC-DC Single Output Desktop Mechanical Specification GS25B series Unit:mm UL1185 16AWG 1230 50mm for 5V UL1185 18AWG 1830 50mm for 7.5~48V POWER LED 70 10mm C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE 79 33 Plug Assignment Standard plug: P1J (option) P1J P/N CENTER OUTPUT + 54 Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 70 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS25B-SPEC 2008-05-08 |
Price & Availability of GS25B05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |